Products
-
Silicon Molybdenum MoSi2 Heating Elements
Molybdenum disilicide MoSi2 heating elements are resistance type heating elements made of a dense ceramic- metallic material which can produce furnace temperatures approaching 1800°C. Although more expensive than traditional metallic elements, MoSi2 elements are known for their longevity due in part to a protective quartz layer that forms on the surface of the element “hot zone” during operation.
-
Silicon Carbide Rod SiC Heating Elements
Silicon carbide rod SiC Heating Element has the characteristics of high temperature resistance, oxidation resistance, corrosion resistance, fast heating, long life, small deformation at high temperature, convenient installation and maintenance, and good chemical stability.
-
Zirconia Ceramic Products
Zirconia ceramics, ZrO2 ceramics, Zirconia Ceramic have excellent properties such as high melting point and boiling point, high hardness, insulator at room temperature, and electrical conductivity at high temperature.
-
Heavy Duty Forged Steel Shaft
Forging steel shafts are widely used in industry, such as forging equipment; power plant equipment; hydraulic equipment; rolling mill equipment; petroleum machinery, etc.
-
Forged Steel Girth Gear
Forged steel girth gear ring is widely used in cement plant, rotary kiln, mining, lifting, light industry, chemical industry, transportation, construction and other machinery and equipment deceleration mechanism.
-
Cemented Tungsten Carbide Button Bits
The grade of carbide buttons / button tips is YG8, YG11, YG11C and so on. They can be used in the mining and oil-field rock tools. Their hard metal are fitting for serving as drill heads of heavy rock-digging machinery, plumbing heads are used in deep hole drilling and rock drilling terrace vehicles.
-
Cemented Tungsten Carbide Cutting Blade
Cemented tungsten carbide cutting blade is widely used for slitting paper, plastic films, cloth, foam, rubber, copper foils, aluminum foils, graphite, etc.
-
CMC CuMoCu Heat Sink
Cu/Mo/Cu(CMC) heat sink, also known as CMC alloy, is a sandwich structured and flat-panel composite material. It uses pure molybdenum as the core material, and is covered with pure copper or dispersion strengthened copper on both sides.
-
99.95% Pure Molybdenum Rod Molybdenum Bar
Pure molybdenum rod / molybdenum bar made by 100% original raw materials. All the moly rod / moly bar we supply can be made with sizes as per customers’ requests.
-
Pure Molybdenum Plate Molybdenum Sheet
Pure molybdenum plate is widely used in the construction of furnace tooling and parts and as a feed stock for the fabrication of parts for the electronics and semiconductor industries. We can supply molybdenum plate and molybdenum sheets as per customers’ requests.
-
Tantalum Rod Tantalum Alloy Bar
Tantalum is a metal element. It mainly exists in tantalite and coexists with niobium. Tantalum has moderate hardness and ductility. It can be drawn into filaments to make thin foils. Its thermal expansion coefficient is very small. Excellent chemical properties, high corrosion resistance, can be used to make evaporating vessels, etc., can also be used as electrodes, electrolysis, capacitors and rectifiers of electronic tubes.
-
Niobium Plate Niobium Alloy Sheet
Our niobium sheets are cold rolled and vacuum annealed with proprietary reduction rates to ensure ideal metallurgy. Each sheet undergoes a stringent inspection for dimensions, surface finish, and flatness.