Top Quality Lathe Machining Parts - CMC CuMoCu Heat Sink – Fotma

Short Description:

Product Detail

Product Tags

Feedback (2)

Our pursuit and company intention is usually to "Always fulfill our purchaser requirements". We go on to acquire and layout excellent high quality products for both our previous and new consumers and realize a win-win prospect for our customers too as us for Purple Tungsten For Stainless Steel, Cnc Plastic, copper tungsten, We sincerely welcome both foreign and domestic business partners, and hope to work with you in the near future!

Top Quality Lathe Machining Parts - CMC CuMoCu Heat Sink – Fotma Detail:

CMC CuMoCu Material Application

Low Expansion Layers and Thermal Paths for Heat Sinks, Lead Frames, Multi-layer Printed Circuit Boards (PCBs), etc.

Heat sink material on aircraft, heat sink material on radar.

CMC CuMoCu Heat Sink (2)

CMC Heat Sink Advantages

1. CMC composite adopts a new process, multilayer copper-molybdenum-copper, the bonding between copper and molybdenum is tight, there is no gap, and there will be no interface oxidation during subsequent hot rolling and heating, so that the bonding strength between molybdenum and copper is excellent, So that the finished material has the lowest thermal expansion coefficient and the best thermal conductivity;

2. The molybdenum-copper ratio of CMC is very good, and the deviation of each layer is controlled within 10%; SCMC material is a multi-layer composite material. The structural composition of the material from top to bottom is: copper sheet – molybdenum sheet – copper sheet – molybdenum sheet… copper sheet, it can be composed of 5 layers, 7 layers or even more layers. Compared with CMC, SCMC will have the lowest thermal expansion coefficient and the highest thermal conductivity.

CMC CuMoCu Heat Sink (1)

Grade of CMC Cu-Mo-Cu Materials

Grade	Density g/cm3	Coefficient of thermal Expansion ×10-6 (20℃)	Thermal conductivity W/(M·K)
CMC111	9.32	8.8	305（XY）/250（Z）
CMC121	9.54	7.8	260（XY）/210（Z）
CMC131	9.66	6.8	244（XY）/190（Z）
CMC141	9.75	6	220（XY）/180（Z）
CMC13/74/13	9.88	5.6	200（XY）/170（Z）

Material	Wt% Molybdenum Content	g/cm3 Density	Thermal conductivity at 25℃	Coefficient of thermal Expansion at 25℃
S-CMC	5	9.0	362	14.8
	10	9.0	335	11.8
	13.3	9.1	320	10.9
	20	9.2	291	7.4

Product detail pictures:

Related Product Guide:

go on to boost, to be certain item quality in line with market and buyer standard demands. Our firm has a excellent assurance procedure happen to be established for Top Quality Lathe Machining Parts - CMC CuMoCu Heat Sink – Fotma , The product will supply to all over the world, such as: Rome, Florida, Mauritius, We can give our clients absolute advantages in product quality and cost control, and we have full range of molds from up to one hundred of factories. As product updating fast, we succeed in developing many high quality products for our clients and get high reputation.

Advance Precision Machining