Massive Selection for Machining Precision - CMC CuMoCu Heat Sink – Fotma

Short Description:

Product Detail

Product Tags

Feedback (2)

We not only will try our greatest to present fantastic expert services to each purchaser, but also are ready to receive any suggestion offered by our prospects for Lanthanated Tungsten, Titanium Filler Wire, Cnc Machining Products, To acquire a consistent, profitable, and constant growth by getting a competitive advantage, and by continuously increasing the value added to our shareholders and our employee.

Massive Selection for Machining Precision - CMC CuMoCu Heat Sink – Fotma Detail:

CMC CuMoCu Material Application

Low Expansion Layers and Thermal Paths for Heat Sinks, Lead Frames, Multi-layer Printed Circuit Boards (PCBs), etc.

Heat sink material on aircraft, heat sink material on radar.

CMC CuMoCu Heat Sink (2)

CMC Heat Sink Advantages

1. CMC composite adopts a new process, multilayer copper-molybdenum-copper, the bonding between copper and molybdenum is tight, there is no gap, and there will be no interface oxidation during subsequent hot rolling and heating, so that the bonding strength between molybdenum and copper is excellent, So that the finished material has the lowest thermal expansion coefficient and the best thermal conductivity;

2. The molybdenum-copper ratio of CMC is very good, and the deviation of each layer is controlled within 10%; SCMC material is a multi-layer composite material. The structural composition of the material from top to bottom is: copper sheet – molybdenum sheet – copper sheet – molybdenum sheet… copper sheet, it can be composed of 5 layers, 7 layers or even more layers. Compared with CMC, SCMC will have the lowest thermal expansion coefficient and the highest thermal conductivity.

CMC CuMoCu Heat Sink (1)

Grade of CMC Cu-Mo-Cu Materials

Grade	Density g/cm3	Coefficient of thermal Expansion ×10-6 (20℃)	Thermal conductivity W/(M·K)
CMC111	9.32	8.8	305（XY）/250（Z）
CMC121	9.54	7.8	260（XY）/210（Z）
CMC131	9.66	6.8	244（XY）/190（Z）
CMC141	9.75	6	220（XY）/180（Z）
CMC13/74/13	9.88	5.6	200（XY）/170（Z）

Material	Wt% Molybdenum Content	g/cm3 Density	Thermal conductivity at 25℃	Coefficient of thermal Expansion at 25℃
S-CMC	5	9.0	362	14.8
	10	9.0	335	11.8
	13.3	9.1	320	10.9
	20	9.2	291	7.4

Product detail pictures:

Related Product Guide:

As for aggressive rates, we believe that you will be searching far and wide for anything that can beat us. We can easily state with absolute certainty that for such good quality at such charges we are the lowest around for Massive Selection for Machining Precision - CMC CuMoCu Heat Sink – Fotma , The product will supply to all over the world, such as: Kyrgyzstan, Johannesburg, Oman, Our domestic website's generated over 50, 000 purchasing orders every year and quite successful for internet shopping in Japan. We would be happy to have an opportunity to do business with your company. Looking forward to receiving your message !

Alloy 825 Material