Factory wholesale Machining Of Parts - CMC CuMoCu Heat Sink – Fotma
Factory wholesale Machining Of Parts - CMC CuMoCu Heat Sink – Fotma Detail:
CMC CuMoCu Material Application
Low Expansion Layers and Thermal Paths for Heat Sinks, Lead Frames, Multi-layer Printed Circuit Boards (PCBs), etc.
Heat sink material on aircraft, heat sink material on radar.
CMC Heat Sink Advantages
1. CMC composite adopts a new process, multilayer copper-molybdenum-copper, the bonding between copper and molybdenum is tight, there is no gap, and there will be no interface oxidation during subsequent hot rolling and heating, so that the bonding strength between molybdenum and copper is excellent, So that the finished material has the lowest thermal expansion coefficient and the best thermal conductivity;
2. The molybdenum-copper ratio of CMC is very good, and the deviation of each layer is controlled within 10%; SCMC material is a multi-layer composite material. The structural composition of the material from top to bottom is: copper sheet – molybdenum sheet – copper sheet – molybdenum sheet… copper sheet, it can be composed of 5 layers, 7 layers or even more layers. Compared with CMC, SCMC will have the lowest thermal expansion coefficient and the highest thermal conductivity.
Grade of CMC Cu-Mo-Cu Materials
| Grade | Density g/cm3 | Coefficient of thermal Expansion ×10-6 (20℃) | Thermal conductivity W/(M·K) |
| CMC111 | 9.32 | 8.8 | 305（XY）/250（Z） |
| CMC121 | 9.54 | 7.8 | 260（XY）/210（Z） |
| CMC131 | 9.66 | 6.8 | 244（XY）/190（Z） |
| CMC141 | 9.75 | 6 | 220（XY）/180（Z） |
| CMC13/74/13 | 9.88 | 5.6 | 200（XY）/170（Z） |
| Material | Wt% Molybdenum Content | g/cm3 Density | Thermal conductivity at 25℃ | Coefficient of thermal Expansion at 25℃ |
| S-CMC | 5 | 9.0 | 362 | 14.8 |
| 10 | 9.0 | 335 | 11.8 | |
| 13.3 | 9.1 | 320 | 10.9 | |
| 20 | 9.2 | 291 | 7.4 |
Product detail pictures:
Related Product Guide:
We will devote ourselves to providing our esteemed customers with the most enthusiastically thoughtful services for Factory wholesale Machining Of Parts - CMC CuMoCu Heat Sink – Fotma , The product will supply to all over the world, such as: Algeria, Hyderabad, Lithuania, We offer the great variety of products in this field. Besides, customized orders are also available. What's more, you will enjoy our excellent services. In one word, your satisfaction is guaranteed. Welcome to visit our company! For more information, please come to our website.If any further inquiries, please feel free to contact us.
By Andrew from New York - 2017.10.23 10:29
The enterprise has a strong capital and competitive power, product is sufficient, reliable, so we have no worries on cooperating with them.
By Diego from Monaco - 2017.08.21 14:13