Factory made hot-sale Nylon Machining - CMC CuMoCu Heat Sink – Fotma

Short Description:

Product Detail

Product Tags

Feedback (2)

We've been proud with the significant shopper fulfillment and wide acceptance due to our persistent pursuit of top of the range both of those on solution and repair for Tungsten Carbide Material, Tungsten Carbide Button, Tungsten Carbide Tipped, We sincerely welcome overseas buyers to consult for that long-term cooperation as well as the mutual progress.

Factory made hot-sale Nylon Machining - CMC CuMoCu Heat Sink – Fotma Detail:

CMC CuMoCu Material Application

Low Expansion Layers and Thermal Paths for Heat Sinks, Lead Frames, Multi-layer Printed Circuit Boards (PCBs), etc.

Heat sink material on aircraft, heat sink material on radar.

CMC CuMoCu Heat Sink (2)

CMC Heat Sink Advantages

1. CMC composite adopts a new process, multilayer copper-molybdenum-copper, the bonding between copper and molybdenum is tight, there is no gap, and there will be no interface oxidation during subsequent hot rolling and heating, so that the bonding strength between molybdenum and copper is excellent, So that the finished material has the lowest thermal expansion coefficient and the best thermal conductivity;

2. The molybdenum-copper ratio of CMC is very good, and the deviation of each layer is controlled within 10%; SCMC material is a multi-layer composite material. The structural composition of the material from top to bottom is: copper sheet – molybdenum sheet – copper sheet – molybdenum sheet… copper sheet, it can be composed of 5 layers, 7 layers or even more layers. Compared with CMC, SCMC will have the lowest thermal expansion coefficient and the highest thermal conductivity.

CMC CuMoCu Heat Sink (1)

Grade of CMC Cu-Mo-Cu Materials

Grade	Density g/cm3	Coefficient of thermal Expansion ×10-6 (20℃)	Thermal conductivity W/(M·K)
CMC111	9.32	8.8	305（XY）/250（Z）
CMC121	9.54	7.8	260（XY）/210（Z）
CMC131	9.66	6.8	244（XY）/190（Z）
CMC141	9.75	6	220（XY）/180（Z）
CMC13/74/13	9.88	5.6	200（XY）/170（Z）

Material	Wt% Molybdenum Content	g/cm3 Density	Thermal conductivity at 25℃	Coefficient of thermal Expansion at 25℃
S-CMC	5	9.0	362	14.8
	10	9.0	335	11.8
	13.3	9.1	320	10.9
	20	9.2	291	7.4

Product detail pictures:

Related Product Guide:

We continuously execute our spirit of ''Innovation bringing development, Highly-quality ensuring subsistence, Management advertising and marketing gain, Credit history attracting buyers for Factory made hot-sale Nylon Machining - CMC CuMoCu Heat Sink – Fotma , The product will supply to all over the world, such as: Czech, Malawi, Sri Lanka, We believe with our consistently excellent service you can get the best performance and cost least goods from us for a long term . We commit to provide better services and create more value to all our customers. Hope we can create a better future together.

3d Machining