Factory best selling Tungsten Alloy - Tungsten Heavy Alloy Rod – Fotma
Factory best selling Tungsten Alloy - Tungsten Heavy Alloy Rod – Fotma Detail:
Specifications
Tungsten Heavy Alloy Grade:
W90NiFe/W92.5NiFe/W93NiFe/W95NiFe/W97NiFe (Slightly Magnetic).
W90NiCu/W92.5NiCu/W93NiCu/W95NiCu/W97NiCu (Nonmagnetic).
Density: 16.8-18.8g/cm3.
Surface: Machined & Ground.
Standard: ASTM B777.
Diameter: 5.0mm – 80mm.
Length: 50mm – 350mm.
Tungsten High Density Alloy Advantages
High density (up to 65% denser than Lead).
Denser materials exist (pure Tungsten, Gold, platinum group metals) but their use is restricted by availability, workability and cost.
Providing mass where volume space is limited.
Concentrated weight essential where accuracy is required in placement of mass.
Placement of weight in situations where airflow has a significant impact.
Thermal Properties of Tungsten Heavy Alloys
High softening temperature.
Low thermal conductivity and low coefficient of expansion gives the material a high resistance to thermal fatigue.
Excellent soldering erosion resistance to molten aluminum. Strong at high temperatures with high thermal stability.
Tungsten High Density Alloy Mechanical Properties
● High Young’s modulus of elasticity. Does not creep when experiencing significant forces, unlike Lead.
● Despite their strength, they remain ductile and resistant to cracking.
● The hardness range of the alloys is typically 20-35 Hardness HRC.
High-Density Tungsten Based Alloy
| Alloy Type(%) | HD17 90W 6Ni 4Cu | HD17D 90W 7Ni 3Fe | HD17.5 92.5W 5.25Ni 2.25Fe | HD17.6 92.5W Balance Ni, Fe, Mo | HD17.7 93W Balance Ni, Fe, Mo | HD18 95W 3.5Ni 1.5Cu | HD18D 95W 3.5Ni 1.5Fe | HD18.5 97W 2.1Ni .9Fe |
| MIL-T-21014 | Class 1 | Class 1 | Class 1 | - | - | Class 3 | Class 3 | Class 4 |
| SAE-AMS-T-21014 | Class 1 | Class 1 | Class 2 | - | - | Class 3 | Class 3 | Class 4 |
| AMS 7725 C | 7725 C | 7725 C | – | – | – | – | – | – |
| ASTM B777-87 | Class 1 | Class 1 | Class 2 | - | - | Class 3 | Class 3 | Class 4 |
| Typical Density (g/cc) | 17.1 | 17.1 | 17.5 | 17.6 | 17.7 | 18 | 18 | 18.5 |
| Typical Density (lbs/in3) | 0.614 | 0.614 | 0.632 | 0.636 | 0.639 | 0.65 | 0.65 | 0.668 |
| Typical Hardness RC | 24 | 25 | 26 | 30 | 32 | 27 | 27 | 28 |
| Ultimate Tensile Strength Min (ksi) | 110,000 | 120,000 | 114,000 | 120,000 | 125,000 | 110,000 | 120,000 | 123,000 |
| 0.2% Offset Yield Strength Min (ksi) | 80,000 | 88,000 | 84,000 | 90,000 | 95,000 | 85,000 | 90,000 | 85,000 |
| Minimum % Elongation (1″ gage length) | 6 | 10 | 7 | 4 | 4 | 7 | 7 | 5 |
| Proportional Elastic Limit (PSI) | 45,000 | 52,000 | 46,000 | 55,000 | 60,000 | 45,000 | 44,000 | 45,000 |
| Modulus of Elasticity (x106psi) | 40 x 106 | 45 x 106 | 47 x 106 | 52 x 106 | 53 x 106 | 45 x 106 | 50 x 106 | 53 x 106 |
| Coefficient of Thermal Expansion x10-6/0C (20-400C) | 5.4 | 4.61 | 4.62 | 4.5 | 4.5 | 4.43 | 4.6 | 4.5 |
| Thermal Conductivity (CGS Units) | 0.23 | 0.18 | 0.2 | 0.27 | 0.27 | 0.33 | 0.26 | 0.3 |
| Electrical Conductivity (% IACS) | 14 | 10 | 13 | 14 | 14 | 16 | 13 | 17 |
| Magnetic | No | Slightly | Slightly | Slightly | Slightly | No | Slightly | Slightly |
Product detail pictures:
Related Product Guide:
Our advancement depends on the superior gear ,superb talents and consistently strengthened technology forces for Factory best selling Tungsten Alloy - Tungsten Heavy Alloy Rod – Fotma , The product will supply to all over the world, such as: Sydney, Swansea, Burundi, We have got constantly insisted on the evolution of solutions, spent good funds and human resource in technological upgrading, and facilitate production improvement, meeting the wants of prospects from all countries and regions.
By Brook from South Africa - 2018.06.18 19:26
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Beulah from Amsterdam - 2018.12.30 10:21